السنيــور
26-05-2003, 05:38 AM
تفضلـو هذا هو الباتش الجديد الذي طال انتظاره :
اذا بغيت تحمله من الموقع الأصلي فلك ما تريد
[فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط]
وإذا بغيت تحمله تحميل مباشر فلك ايضاً ما تريد
[فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط]
وهذه هي مواصفاتـــــــــــــــــــــــــــه
Bugfixes/Changes of ToH3.0:
===========================
- Most of ToH menus are converted to original Humax-Menu engine (rest will follow)
- New Config Menu
- Advanced ChannelInfoBox with signal power and signal quality
- New Audio Video User settings
- YUV added to Video formats (a little circuit is needed for YUV)
(thanx to Cybergent and oldowl from [فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط])
- Gain adjustment for RGB/YUV
- Format ratio enlarged with Auto 16:9/4:3 function
- Premiere NVOD management function (Portalmode) with yellow key on Portalchannel
- Direct card access mode, done with Mickey
- Time Offset (TO) in PMCT reactivated
- New Motor Movement Management
- ChannelInfoBox stays during Movement
- Up to 49 Motor positions available
- Orbital positions with degree-context
- All Satellites with new SatcoDX transponder tables for autoscan
- New help window with most channel infos
- Option for transparent background picture
- Option to close channellist with OK button
- R/L Audio Option in PMCT to select 2 channel audio films
- Function to repeat DiSEqC command for two times
- O-EPG to get ToH EPG mode
- Pacman
- Most of ToH menus are converted to original Humax-Menu engine (rest will follow)
Most of the ToH style design modules and menus are converted to a common like style.
Some of the ToH menus have still to be converted, it will follow in future versions.
- New Config Menu
There is a new config menu you call it in the ToH entry in main menu, to control most
of the available ToH extended features.
- Advanced ChannelInfoBox with signal power and signal quality
Now in ChannelInfoBox signal power and signal quality is shown and a new symbol if
Portalmode is available on the channel.
- New Audio Video User settings
Since this version it is possible to store three independent Audio Video Setting of
your own. So you can store one mode for using YUV on a projector and one other mode to
use the receiver with a television in RGB or CVBS mode. You can select mode while
pressing blue remote control key (UHF), if you press OK on one selected mode, you can
change A/V Output Settings. All changes are stored in settings.
- YUV is added to Video formats selection (a little circuit is needed for YUV)
With this version there is a direct YUV mode support, you can select it like other
modes (RGB/CVBS/S-Video/YUV). A little circuit is needed to add C-Sync signal to the
Y-Output of the Humax Scart connector. You can see it in the attached picture
Humax_YUV.jpg.
- Gain adjustment for RGB/YUV
It is possible to control and store RGB and YUV gaining with A/V Output Settings.
- Format ratio enlarged with Auto 16:9/4:3 function
All possible Screen Modes can now be controlled with A/V Output Settings.
- Premiere NVOD management function (Portalmode) with yellow key on Portalchannel
A new Portalmode is added to select PPV Subchannels on Premiere. An own documentation
is added for this (see Potalmode.html).
- Direct card access mode, done with Mickey
It's possible to set card commands from PC, for example to set PIN for Premiere cards.
More info will follow in the future.
- Time Offset (TO) in PMCT reactivated
Like in older versions it is possible to activate/deactivate Time Offset function for
special channels with an PMCT entry.
Die DiSEqC Motorsteuerung wurde überarbeitet. Der Null Punkt Rücklauf zu Astra beim Einschalten
wurde entfernt. Ebenfalls wurde die Autofocus Funktion überarbeitet.
- New Motor Movement Management
The DiSEqC motor controlling was done in a new way. The zero movement to Astra during
startup was removed. The lost of focus for motors was worked out.
- ChannelInfoBox stays during Movement
The ChannelInfoBox stays during whole motor movement, to see signal during movement.
- Up to 49 Motor positions available
Now it is possible to store about 49 different satellites positions. The positions with a *
have to be positioned by your own. They are used for an overview.
- Orbital positions with degree-context
All satellites are shown with the correct orbit position also during movement.
- All Satellites with new SatcoDX transponder tables for autoscan
Transponder list are worked over to scan the right transponders using an autoscan.
- New help window with most channel infos
All useful infos are now shown in the help window by pressing ? on a channel. It can
be scrolled by using cursor up/down.
- Option for transparent background picture
The selection for background pictures was added to get picture transparency. So you can
see how some changes will change the picture in a direct way (for example RGB/YUV gaining).
- Option to close channel list with OK button
Now users can select, if channel list will be closed after pressing OK in the channel list
or it shall work like in older versions. You can control it in Config Menu.
- R/L Audio Option in PMCT to select 2 channel audio films
It is possible to select which audio language shall be active, if a channel shall works as
a 2 channel audio mode channel. It is useful for channels, which sends original audio on
Right and foreign audio on Left channel. You can select with PMCT in ToH EPG module, which
channel shall be active while switching to such a channel.
You get with the 2. Byte IdentExt in PMCT:
D0 = Check-DD
D1 = no Check-DD
A0 = L/R (Default)
A1 = L Audiokanal
A2 = R Audiokanal
- Function to repeat DiSEqC command for two times
For people who use a 12V- or option-switch cascaded together with a multi-switch, there is a problem
to get the commands in correct order to the switches. With this option in Config Menu it is possible
to send the DiSEqC command two times. One time before setting the 12V voltage and a second
time after setting it, to avoid switching problems, which results in getting no signal.
- O-EPG to get ToH EPG mode
In this version the original Humax EPG is called while pressing the EPG key on the remote
control. If you want to have the ToH EPG module, you get it by pressing 0+EPG.
[فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط]
[فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط]
اذا بغيت تحمله من الموقع الأصلي فلك ما تريد
[فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط]
وإذا بغيت تحمله تحميل مباشر فلك ايضاً ما تريد
[فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط]
وهذه هي مواصفاتـــــــــــــــــــــــــــه
Bugfixes/Changes of ToH3.0:
===========================
- Most of ToH menus are converted to original Humax-Menu engine (rest will follow)
- New Config Menu
- Advanced ChannelInfoBox with signal power and signal quality
- New Audio Video User settings
- YUV added to Video formats (a little circuit is needed for YUV)
(thanx to Cybergent and oldowl from [فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط])
- Gain adjustment for RGB/YUV
- Format ratio enlarged with Auto 16:9/4:3 function
- Premiere NVOD management function (Portalmode) with yellow key on Portalchannel
- Direct card access mode, done with Mickey
- Time Offset (TO) in PMCT reactivated
- New Motor Movement Management
- ChannelInfoBox stays during Movement
- Up to 49 Motor positions available
- Orbital positions with degree-context
- All Satellites with new SatcoDX transponder tables for autoscan
- New help window with most channel infos
- Option for transparent background picture
- Option to close channellist with OK button
- R/L Audio Option in PMCT to select 2 channel audio films
- Function to repeat DiSEqC command for two times
- O-EPG to get ToH EPG mode
- Pacman
- Most of ToH menus are converted to original Humax-Menu engine (rest will follow)
Most of the ToH style design modules and menus are converted to a common like style.
Some of the ToH menus have still to be converted, it will follow in future versions.
- New Config Menu
There is a new config menu you call it in the ToH entry in main menu, to control most
of the available ToH extended features.
- Advanced ChannelInfoBox with signal power and signal quality
Now in ChannelInfoBox signal power and signal quality is shown and a new symbol if
Portalmode is available on the channel.
- New Audio Video User settings
Since this version it is possible to store three independent Audio Video Setting of
your own. So you can store one mode for using YUV on a projector and one other mode to
use the receiver with a television in RGB or CVBS mode. You can select mode while
pressing blue remote control key (UHF), if you press OK on one selected mode, you can
change A/V Output Settings. All changes are stored in settings.
- YUV is added to Video formats selection (a little circuit is needed for YUV)
With this version there is a direct YUV mode support, you can select it like other
modes (RGB/CVBS/S-Video/YUV). A little circuit is needed to add C-Sync signal to the
Y-Output of the Humax Scart connector. You can see it in the attached picture
Humax_YUV.jpg.
- Gain adjustment for RGB/YUV
It is possible to control and store RGB and YUV gaining with A/V Output Settings.
- Format ratio enlarged with Auto 16:9/4:3 function
All possible Screen Modes can now be controlled with A/V Output Settings.
- Premiere NVOD management function (Portalmode) with yellow key on Portalchannel
A new Portalmode is added to select PPV Subchannels on Premiere. An own documentation
is added for this (see Potalmode.html).
- Direct card access mode, done with Mickey
It's possible to set card commands from PC, for example to set PIN for Premiere cards.
More info will follow in the future.
- Time Offset (TO) in PMCT reactivated
Like in older versions it is possible to activate/deactivate Time Offset function for
special channels with an PMCT entry.
Die DiSEqC Motorsteuerung wurde überarbeitet. Der Null Punkt Rücklauf zu Astra beim Einschalten
wurde entfernt. Ebenfalls wurde die Autofocus Funktion überarbeitet.
- New Motor Movement Management
The DiSEqC motor controlling was done in a new way. The zero movement to Astra during
startup was removed. The lost of focus for motors was worked out.
- ChannelInfoBox stays during Movement
The ChannelInfoBox stays during whole motor movement, to see signal during movement.
- Up to 49 Motor positions available
Now it is possible to store about 49 different satellites positions. The positions with a *
have to be positioned by your own. They are used for an overview.
- Orbital positions with degree-context
All satellites are shown with the correct orbit position also during movement.
- All Satellites with new SatcoDX transponder tables for autoscan
Transponder list are worked over to scan the right transponders using an autoscan.
- New help window with most channel infos
All useful infos are now shown in the help window by pressing ? on a channel. It can
be scrolled by using cursor up/down.
- Option for transparent background picture
The selection for background pictures was added to get picture transparency. So you can
see how some changes will change the picture in a direct way (for example RGB/YUV gaining).
- Option to close channel list with OK button
Now users can select, if channel list will be closed after pressing OK in the channel list
or it shall work like in older versions. You can control it in Config Menu.
- R/L Audio Option in PMCT to select 2 channel audio films
It is possible to select which audio language shall be active, if a channel shall works as
a 2 channel audio mode channel. It is useful for channels, which sends original audio on
Right and foreign audio on Left channel. You can select with PMCT in ToH EPG module, which
channel shall be active while switching to such a channel.
You get with the 2. Byte IdentExt in PMCT:
D0 = Check-DD
D1 = no Check-DD
A0 = L/R (Default)
A1 = L Audiokanal
A2 = R Audiokanal
- Function to repeat DiSEqC command for two times
For people who use a 12V- or option-switch cascaded together with a multi-switch, there is a problem
to get the commands in correct order to the switches. With this option in Config Menu it is possible
to send the DiSEqC command two times. One time before setting the 12V voltage and a second
time after setting it, to avoid switching problems, which results in getting no signal.
- O-EPG to get ToH EPG mode
In this version the original Humax EPG is called while pressing the EPG key on the remote
control. If you want to have the ToH EPG module, you get it by pressing 0+EPG.
[فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط]
[فقط الاعضاء المسجلين هم من يمكنهم رؤية الروابط]